Intake Manifold and Exhaust System
Intake Manifold Removal and Installation (cont'd)
5. Install the EVAP canister purge hose (A) and brake
booster v a c u u m hose (B).
6. Install the air intake duct (A), then install the
breather pipe (B).
7. Clean up any spilled engine coolant.
8. After installation, check that all tubes, hoses and
connectors are installed correctly.
9. Install the intake manifold cover.
10. Refill the radiator w i t h engine coolant, then bleed
air f r o m the cooling system w i t h the heater valve
open (see step 8 on page 10-7).
9-6