Honda ACCORD HYBRID 2005 Service Manual page 214

Engine Lubrication
O i l P u m p O v e r h a u l ( c o n t ' d )
5. Remove all of the old liquid gasket f r o m the oil
p u m p mating surfaces, bolts, and bolt holes.
6. Clean and dry the oil p u m p m a t i n g surfaces.
7. A p p l y liquid gasket, P/N 08717-0004, 08718-0001,
08718-0003,or 08718-0009, evenly to the engine
block mating surface of the oil p u m p .
NOTE: Do not install the parts if 4 minutes or more
have elapsed since a p p l y i n g liquid gasket. Instead,
reapply liquid gasket after r e m o v i n g the old
residue.
8. Grease the lip of the oil seal, and apply oil to the
new O-rings (A).
A B
9. Install the dowel pins (B), then align the inner rotor
w i t h the crankshaft, and install the oil p u m p (C).
10. Clean the excess grease off the crankshaft, and
check the seal for distortion.
11. Install the oil screen (D).
12. Install the oil pan (see page 7-29).
13. Install the oil filter base/oil filter assembly, w i t h a
new O-ring (see step 37 on page 7-28).
14. Install the CKP sensor (see page 11-216).
15. Install the idler pulley.
16. Install the t i m i n g belt (see page 6-19).
8-14