Honda ACCORD HYBRID 2005 Service Manual page 213

4. Check the housing-to-outer rotor radial clearance
between the outer rotor (A) and p u m p housing (B).
If the housing-to-outer rotor radial clearance
exceeds the service limit, replace the oil p u m p
assembly.
Housing-to-Outer Rotor Radial Clearance
Standard (New): 0.10—0.19 mm (0.004—0.007 in.)
Service Limit. 0.20 mm (0.008 in.)
A B
5. Inspect both rotors and p u m p housing for scoring
or other damage. Replace parts, if necessary.
6. A p p l y liquid thread lock to the p u m p housing
screws, then install the oil p u m p cover.
7. Check that the oil p u m p turns freely.
Installation
1. Remove the old crankshaft oil seal f r o m the oil
p u m p .
2. Gently tap in the new crankshaft oil seal until the oil
seal driver bottoms on the p u m p .
3. Remove all of the old liquid gasket f r o m the oil
p u m p m a t i n g surfaces, bolts, and bolt holes.
4. Clean and dry the oil p u m p m a t i n g surfaces.
(cont'd)
8-13