Honda ACCORD HYBRID 2005 Service Manual page 193

22. A p p l y a light coat of multipurpose grease to the
crankshaft and to the lip of the seal.
23. Drive the n e w crankshaft oil seal until the special
tool b o t t o m s on the engine block end cover.
24. Remove all of the old liquid gasket f r o m the engine
block end cover mating surfaces, bolts, and bolt
holes.
25. Clean and dry the engine block end cover mating
surfaces.
26. A p p l y liquid gasket, P/N 08717-0004, 08718-0001,
08718-0003, or 08718-0009, evenly to the engine
block mating surface of the engine block end cover.
NOTE: Do not install the parts if 4 minutes or more
have elapsed since applying the liquid gasket.
Instead, reapply liquid gasket after r e m o v i n g the
old residue.
27. Install the dowel pins (A), n e w O-ring (B), and the
engine block end cover (C) on the engine block.
28. Clean the excess grease off the crankshaft, and
check the seal for distortion.
(cont'd)
7-27