Gestetner G060 Service Manual page 612

SCANNER SP
5.5 SCANNER SP
5.5.1 SP MODES
SP1-xxx (System and Others)
1
(Class 1, 2, and 3)
001 [System]
1 Model Name
2 Scanner Firmware
Version
3 Scanner Firmware
Number
4 Detail Model Name
[Error Log Display]
002
1 Error Log Display
003 [FTP Port Number]
1 FTP Port Number
004 [Compression Type]
1 Compression Type
005 [Erase margin]
1 Erase Margin
[Auto Reset Timer]
006
1 Auto Reset Timer
G570
Mode No.
*
NV
* NV
*
NV
*
NV
*
NV
*
NV
Function / [Setting]
Displays the model name.
Displays the scanner firmware version.
Displays the firmware's part number.
Displays the detail model name.
Displays the error log data.
Changes the FTP port number.
After changing this value, do the following:
1. Run the Registry Editor
2. Access
/HKEY_LOCAL_MACHINE/SOFTWARE/
Ricoh/NetworkScanner
Change the value of 'PortNo' to this SP
3.
mode's value
[0 to 65535 / 3670 / 1/step ]
Selects the compression type for binary picture
processing.
[ 1 to 3 / 3 / 1/step ]
1: MH, 2: MR, 3: MMR
Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0 to 5 / 0 / 1 mm/step ]
Adjusts the auto reset timer for the scanner
function.
If this is "0", the auto reset function is disabled.
[0 to 99 / 60 / 1 sec/step ]
5-74 SM