Gestetner G060 Service Manual page 470

REPLACEMENT
3.4.11 REQUIRED ACTIONS WHEN REPLACING ITEMS
ITEMS
Scanner unit
Printer mainframe
NVRAM expansion
board on the
controller
NVRAM on the
controller
Controller without
NVRAM
NVRAM on the
BCU
BCU without
NVRAM
G570
BEFORE REPLACING
None
None
1. Print out the SMC report.
2. Export the User Codes.
Print out the SMC report.
None
Print out the SMC report.
None
3-22
AFTER REPLACING
1. Adjust the registration for the
scanner and ARDF.
2. Do ACC for the copier application.
3. Do ACC for the printer application.
1. Do ACC for the copier application.
2. Do ACC for the printer application.
1. Execute SP5-801-3.
2. Execute SP5-801-9.
3. Execute SP5-801-10.
4. Execute SP5-801-12.
5. Reset the system settings.
6. Enter the SP and UP mode values
from the SMC report.
7. Import the User Codes.
8. Do ACC for the copier application.
9. Do ACC for the printer application.
1. Enter the SP and UP mode values
from the SMC report.
2. Do ACC for the copier application.
3. Do ACC for the printer application.
4. Reset the total counter to 0 if meter
charge mode is enabled.
None
1. Enter the machine's device number
and destination code.
2. Reset the settings for meter charge.
3. Enter the SP and UP mode values
from the SMC report.
4. Execute the process control self-
check.
5. Do ACC for the copier application.
6. Do ACC for the printer application.
None
SM