Gestetner G060 Service Manual page 705

1.2.3 FAX FUNCTION UPGRADE UNIT INSTALLATION
[C]
[D]

CAUTION
Before installing this option, do the following:
1. Print out all data in the printer buffer.
2. Turn off the main switch and disconnect the power cord and the
network cable.
1. Turn on the DIP switch [A] on the fax function upgrade unit [B].
2. Attach the stand [C] to this unit.
3. Connect the fax function upgrade unit to CN621 and attach the stand to the
board.
4. Turn the main switch off and on.
5. Enter service mode and set bit 7 of system switch 1E to "1"
NOTE: When installing the fax unit and fax function upgrade unit at the same time,
turn on the DIP switch [D] on the MBU board.
SM
[B]
1-9
FAX UNIT OPTIONS
[A]
G307I103.WMF
G307