Gestetner G060 Service Manual page 542

SERVICE PROGRAM MODE – CF CONFIGURATION
Exiting Service Mode
Press the "Exit" key on the touch-panel.
NOTE: To make the following settings effective, you must turn the main switch off
and on after exiting service mode.
SP Modes Related to the Engine
SP2-208-009
SP2-213-001
SP2-224-001 to 004
SP5-930-001 to 005
SP5-994-001 and 002
SP7-905-007 and 009
SP5-998-001
NOTE: If the settings of SP modes 5-993-013 to 015 are changed, these changes
will affect the next line position adjustment.
G570
SP Modes Related to the Controller
SP5-009-001
SP5-302-002
SP5-801-003 to 013
SP5-832-001 to 004
SP5-961-001
5-4 SM