Gestetner G060 Service Manual page 940

Tech Service Bulletin No. G060/G570 – 017
Page 2 of 5
Total Counter Reference:
While investigating this issue, it became apparent that there was some confusion in the field regarding the
proper usage of the various meter modes for billing purposes. For all G060 CMF units, that have CPP
Contracts as the billing method, the following recommended settings should be utilized.
Development click contracts
Meter charge mode SP5-930-1 set to 1- "ON"
SP5-045-1 should be set to "0"
System User Tool "B/W Page Detect" set to
"ON" (ACS Mode)
NOTE: Use of ANY other combination of the settings may result in improper meter calculations.
AUTO COLOR SELECTION: ACS: (USER TOOL > SYSTEM > B/W PAGE DETECT)
When set to ON: When the machine detects a color page it will automatically shift from black and white to
color mode. The machine shifts to color mode and does not shift back to black and white mode to maintain
engine speed (constant shifting between color and black modes would greatly reduce speed).
NOTE: ACS is not available on the Copier Feature Expander, black and white or color modes are selected
by the user.
Sample
Print Job
Black and White Mode:
The transfer Belt is only
(and always) in contact
with the Black
photoconductor unit.
[Engine speed: 38ppm]
Page click contracts
Meter charge mode SP5-930-1 set to 1- "ON"
SP5-045-1 should be set to "1"
System User Tool "B/W Page Detect" set to
"ON" (ACS Mode)
K CMYK K
ACS OCCURS
K CMYK
Color Mode:
The transfer belt lifts to
allow paper to contact
the color photoconductor
units.
[Engine speed: 28ppm]
Continued...