Gestetner G060 Service Manual page 900

Tech Service Bulletin No. G060/G570/G082 – 008
Page 2 of 2
Please see the following notes for machine installation and short-haul transport:
1. At Machine Installation:
The transport unit lever has been removed and placed
inside the machine as shown in the illustration. This lever
must be re-installed when the machine arrives at the
customer's location.
The attachment procedure for this lever has been
packaged together with the machine.
2. Short-Haul Transport:
The notes for short-haul transport are the same as the
G060, except for the additional procedure described
below.
Additional procedure for G082 short-hauls:
1. Open the front cover.
2. Turn the transfer unit release lever counterclockwise to lower the transfer unit.
3. Remove the lever (1 screw).
4. Reinstall the lever when the machine arrives at the installation site.