Gestetner G060 Service Manual page 300

CONTROLLER
Paper Source Selection
Tray Priority (Auto Tray Select)
The "Tray Priority" setting determines
the start of the tray search when the
user selects "Auto Tray Select" with
the driver. The machine searches for
a paper tray with the specified paper
size and type.
When no tray contains paper that
matches the paper size and type
specified by the driver, the controller
stops printing until the user loads the
correct paper.
The "Tray Priority" setting can be
specified in the "Paper Input" menu.
(Menu/ Paper Input/ Tray Priority)
NOTE: The by-pass feed table is not
part of the tray search.
Tray Lock
If "Tray Lock" is enabled for a tray, the controller skips the "locked" tray in the tray
search process.
The "Tray Lock" setting can be specified in the "Paper Input" menu.
(Menu/ Paper Input/ Tray Lock)
NOTE: The by-pass feed table cannot be unlocked (Tray Lock is always enabled).
Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
G060
Priority Tray
Tray 1
Tray 2
LCT (Optional)
Tray 3 (Optional)
Tray 4 (Optional)
6-70
Start of Tray Search
G060D555.WMF
SM