Gestetner G060 Service Manual page 132

SC TABLE
SC No. Item
SC 501 Paper Tray 1 When the tray lift motor is
error turned on, if the upper limit is
not detected within 10
SC 502 Paper Tray 2
seconds, the machine asks the
error
user to reset the tray. If this
condition occurs three
consecutive times, the SC is
generated.
G060
Definition Possible Cause
• Defective paper lift
sensor
• Defective tray lift
motor
• Defective bottom
plate lift mechanism
4-18
Related
Troubleshooting Procedure
SCs
1. Turn the main switch off and on.
2. Check if the bottom plate smoothly
moves up and down manually.
3. Check and/or replace the paper lift
sensor.
4. Check and/or replace the tray lift
motor.
Type
SM