Gestetner G060 Service Manual page 912

3. Open the Right Door Unit [G] and remove it (3
connectors, 1 snap-ring).
4. Replace the Guide Plate [H] with the new
#G0602613 assembly (2 screws).
Note: Clean the Registration Rollers with a damp
cloth.
5. Reattach all parts removed above.
UNITS AFFECTED:
B060/G570 Serial Number cut-in not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
[H]
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.