Gestetner G060 Service Manual page 301

Auto Continue
Overview
When this function is enabled, the machine waits for a specified period (0, 1, 5, 10,
15 minutes) for the correct paper size and type to be set in the tray. If the timer
runs out, the machine starts printing, even if there is no paper tray which matches
the paper size and paper type specified by the driver.
The machine searches for a paper tray in the following way.
• The interval can be set with the "System" menu in the User Tools.
(Menu/ System/ Auto Continue)
NOTE: The default setting for this feature is 'disabled'.
Auto Tray Select
When there is no paper tray that
matches the paper size and type
specified by the driver, the machine
searches for any tray that has paper,
and prints from the first tray it finds.
The start of the tray search is the
tray selected as the "Priority Tray."
Manual Tray Select
The machine prints from the selected tray even if the paper size and type do not
match the setting specified from the driver.
If "Auto Continue" is disabled, the machine waits until the user loads the correct
paper in the tray.
SM
Priority Tray
Tray 1
Tray 2
LCT (Optional)
Tray 3 (Optional)
Tray 4 (Optional)
6-71
CONTROLLER
Start of Tray Search
G060D555.WMF
G060