Gestetner G060 Service Manual page 1090

Firmware History for G060
DESCRIPTION OF MODIFICATION
⇒
The following have been corrected:
PCL
- The following problems with the CAD
print file were fixed.
1) Modified the available pen number
from 8 to 256 when BitSw #3-3 is ON.
2) The "null" character is ignored
when it is included in HP/GL2 data.
3) The status flag for the bold
selection command is refreshed when
the bold
HP/GL2 data is selected.
- Supports mixed binding orientations
with duplex jobs using cover sheets.
-The downloaded PCL Barcode fonts
are not printed correctly on the PCL font
list.
- The Barcodes are printed with shift
- Selecting HDD font may reduce
available memory.
- Supported SAP Barcode & OCR
printing.
PS
- PS error occurs when unknown media
type is specified.
- The default setting of mainframe
System/Resolution is "1200 x 600dpi".
⇒
The following have been corrected:
Changing Adobe PostScript 3 Logo in PS
config page to red.
selection command In
FIRMWARE SERIAL
LEVEL NUMBER
G0775910 M -
G0775911 M
G0775910 N April
G0775911 N 2003
FIRMWARE CHECK
VERSION SUM
2.20 -
2.21 3BC5
18E2
Page 13 of 16