Device Name - Gestetner G060 Service Manual

Tech Service Bulletin No. G082 – 002
Page 2 of 4
! Install and Configure Fiery ColorWise Pro Tools
A. Install the Fiery ColorWise Pro Tools: Follow the instructions in the Getting Started manual
page 49 (135/861) – page 52 (138/861).
B. Configure the Connection: Follow the instructions in the Getting Started manual page 51.
NOTES:
Nickname: Enter a name for the Fiery 3850C; it does not have to match the actual Server
Name of the Fiery 3850C. However, The nickname cannot contain any of the following
seven characters:
!"#"$"%"&"
Protocol: Choose the type of network protocol you are using from the pop-up menu.
Fiery utilities for the Fiery 3850C: Not supported over IPX/SPX. Command
WorkStation software is supported on Windows computers over TCP/IP.
Server Name: Enter the IP address (or DNS name) of the Fiery 3850C.
New Device: Enter 3850C, the device name for the Fiery 3850C.
Nickname

Device Name

" Download the Profiles:
A. Launch ColorWise Pro Tools and click on the Profile Manager. The left side of the main Profile
Manager windows lists the ICC profiles in the default directory of your workstation. If the profile
you want does not appear, click browse and go the ICM directory of the Fiery 3850C User
software CD.
B. Browse to the directory and select the profile you want to download and click OK.
Fiery 3850C 600 100GCR.ICM
o
Fiery 3850C 1200 100GCR.ICM
o
<space> <tab>
"
Follow the instructions in the Color Guide pages 4-5 (505/861)