Gestetner G060 Service Manual page 887

        U U
        U U
               U U U U
   h  GL    h  GL    h  GL    h  GL
  h GLNN   h GLNN   h GLNN   h GLNN
   h GL    h GL    h GL    h GL
SUBJECT: SP5-801-001 NVRAM CLEAR (ALL)
SYMPTOM:
Strange Characters are displayed on the LCD. The printer is not usable in this condition.
CAUSE:
Performing SP5-801-001 clears the serial number and sets the destination code to zero (Japan). The
strange characters are displayed on the LCD because the Japanese language is not stored in the firmware.
SOLUTION:
To avoid this problem, never perform SP5-801-001 (All)
The following SP modes are not affected and can be used:
SP5-801-003 (SCS) clears the system settings.
SP5-801-008 (PRT) clears the user mode system settings.
SP5-801-011 (NCS) clears the network settings.
   
Copyright 2001 RICOH Corporation. All rights reserved.
   
   
NJN g NNG NJN g NNG
NJN g NJN g NNG NNG
     
     
     
     
ENfGNf.NNE ENfGNf.NNE
ENfGNf.NNE ENfGNf.NNE
CONTROL NO. 064CLR