Gestetner G060 Service Manual page 1054

Tech Service Bulletin No. G060/G570 – 043
•
UPDATE 2:
OLD PART NO. NEW PART NO.
-
G0603694
-
G0603923
*
DENOTES NEW ITEM NUMBER
UNITS AFFECTED:
All G060/G570 printers manufactured after the serial numbers listed below will have the new style Transfer
Release Lever installed during production.
Transfer Release Lever – The following changes have been made to
ensure that the transfer belt is not scratched from vibration during
transport, which can occur as the machine is shipped from the factory
with the belt and drum contacting each other.
1) The machine is now shipped with the drum released from the
transfer belt, i.e. with the release lever secured with tape in a second
(new) unlocked position.
2) The parts listed below have been modified so that the front door can
be closed with the lever in the second unlocked position for shipping.
At installation, the lever must then be set to the locked position for the
door to close.
Please update your G060/G570 Parts Catalog with the following
information.
G0603712 Torsion Spring
G0773697 Shaft – Release
07200040 Retaining Ring – M4
G0773923 Release Lever
MODEL NAME
Gestetner DSc38
Lanier 2138
Ricoh Aficio AP3800C
Savin SLP38c
DESCRIPTION
SERIAL NUMBER
P6020600330
REFERENCE
QTY INT PAGE ITEM
1 3/S 41 23 *
1 3/S 41
1 3/S 41 109 *
1 3/S 37 15
Page 2 of 3
3