Gestetner G060 Service Manual page 1072

Tech Service Bulletin No. G082 – 006
UNITS AFFECTED:
1. Pick-Off Pawls
All G082 printers manufactured after the serial numbers listed below will have the new style Fusing
Strippers installed during production.
Gestetner DSc38F
Lanier 2138E
Ricoh Aficio AP3850C
Savin SLP38cDE
Cut-in product Part Number (on the seal attached to the Fusing unit):
G765-17 212 (on the box): G76517212xxx (on the fuser)
NOTE: This modification was applied from Part Number suffix B.
2. Fusing Belt
All G082 printers manufactured after the serial numbers listed below will have the amount of adhesive
increased and more evenly applied during production.
Gestetner DSc38F
Lanier 2138E
Ricoh Aficio AP3850C
Savin SLP38cDE
Cut-in product Part Number (on the seal attached to the Fusing unit):
G765-17 212 (on the box): G76517212xxx (on the fuser)
NOTE: This modification was applied from Part Number suffix B.
3. Oil Supply Unit
The serial number cut-in and part number information was not available at the time of this publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
MODEL NAME
MODEL NAME
2
3
SERIAL NUMBER
P8930200001
SERIAL NUMBER
P8930200001
NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.
Page 2 of 2