Gestetner G060 Service Manual page 932

FIRMWARE HISTORY
3. CONTROLLER FIRMWARE MODIFICATION HISTORY
CONTROLLER FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Installed from the first mass production run.
!
"Asia" has been added to the destination
!
code.
The following problem has been corrected:
When designating the Finisher shift tray 1
!
for paper output tray as default, paper is not
fed out to shift tray 1.
The counter click up specification has been
changed as follows:
Old Specification:
Machine counts a page up as black or
!
color based on the color data sent from the
application. Therefore if a document from
the PC contains blank (but defined) spaces
highlighted in red, e.g., the controller
interprets this as color data and counts it as
a color print.
New Specification:
The machine counts up the page as B/W or
!
color based on the CMYK data, i.e. the
actual toner colors used to develop the
image, regardless of the actual color data
from the application.
To meet the CPU specification change from
!
250MHz to 300MHz.
Color profile of the PCL driver has been
changed to Ver. 1.1.2a.
The following problem has been corrected.
B&W prints cannot be made if color toner is
!
empty.
HDD format cannot be done when SC860 is
!
detected.
CRD version of PS3 has been updated to
!
Ver. 1.2.1.
Presentation color profile version of PCL
!
has been updated to Ver. 1.2.1.
(Photographic color profile stays the same
as Ver. 1.1.2a.)
G060
FIRMWARE
LEVEL
G0605910 G
G0605911 G
G0605910 H
G0605911 H
G0775910
G0775911
NOTE 1-The Meter Click counter
specification has been changed from the
controller firmware (Ver. 2.04). The
machines with Ver. 2.01 or older have been
reworked in local. However, some
machines have been released to the
market without modification. So, please
make sure that the version of the engine
main firmware is "2.04" or later at
installation or next visit. If not, please
update it to the latest firmware.
G0775910 A
G0775911 A
14-6
Rev. 10/2002
SERIAL FIRMWARE
NUMBER VERSION
July 2001 2.00
July 2001 2.01
August 2.04
2001
(See Note 1)
NA 2.05
SM