Gestetner G060 Service Manual page 949

Tech Service Bulletin No. G060/G570 – 019
Page 2 of 3
1. Normal paper from paper trays:
The last page is not passed through the duplex unit since normal paper is not direction-sensitive.
2 4
3
1
2. Letterhead paper from paper trays:
The last (3rd) sheet of paper is passed through the duplex unit simply to invert it, which allows Pg. 5 to be
printed out on the front side (i.e. the side containing the letterhead pattern).
2 4
1 3
NOTE: The letterhead paper should be loaded into the tray face-up.
3. Letterhead fed as a cover sheet from the by-pass table, with normal paper from the paper tray for the
remaining pages.
(Only with the RPCS driver):
1 3
Letter Normal
Head
2
NOTE: Please place the letterhead paper on the by-pass table face-up.
4. Letterhead paper fed as a cover sheet from one paper tray, with normal paper for the remaining pages
from another paper tray.
(Only with RPCS driver.)
a. When selecting a one-sided cover sheet (in the driver)
NOTE: Although this operation is possible, the image will come out on the rear side of the letterhead
sheet, i.e. the side without the letterhead pattern. We therefore recommend #3 above, i.e. feeding
from the bypass tray.
5
Simplex
Duplex Path
nd
2 side
5
5
Normal
4
Duplex Path
Continued...