Gestetner G060 Service Manual page 898

Tech Service Bulletin No. G060 – 007
Page 3 of 3
Installation Workflow continued:
Will a finisher be installed?
Install the punch unit (if required)
Install the finisher
Select the language
Set the date and time
Clear the memory of IPU/Net file/Scanner
(SP5-801-9, 10, 12)
Perform ACC
Check magnification and registration
Adjust the operation panel display if
necessary)
See the recommended service settings
below
Recommended service settings:
SP 5-930-1 Meter Charge
SP 5-930-3 Menu
SP 5-045
SP 5-104
SP 7-825
Installation Complete
A
Yes
Install the Multi-bin output tray (if required)
0=>1
1 (keep at default)
Counter Method 1(prints) or 0 (developments) [either one]
Double Count 0=>1 (double count)
Counter Reset Execute
No