Gestetner G060 Service Manual page 909

Tech Service Bulletin No. G060/G570 – 009
Page 7 of 7
•
UPDATE 12:
OLD PART NO. NEW PART NO.
G0604483
UNITS AFFECTED:
All G060/G570 Printers manufactured after the Serial Numbers listed below will have the new style Shaft –
Paper Sensor installed during production.
Gestetner DSc38/DSc38S
Ricoh AP3800C/ AP3800CMF
Savin SLP38c/SLP38cS
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Shaft – Paper Sensor – The shape of the feeler for the Paper
Overflow Sensor has been changed to ensure that it stays properly
engaged when the paper has exited or the paper stack is removed.
G0604479 Shaft – Paper Sensor
MODEL NAME
DESCRIPTION
SERIAL NUMBER
P6011200001
P6011200001
P6011200001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY INT PAGE ITEM
1-1 1 53 18