Gestetner G060 Service Manual page 624

FIRMWARE UPDATE PROCEDURE
5.7 FIRMWARE UPDATE PROCEDURE
5.7.1 TYPE OF FIRMWARE
There are 11 types of firmware as shown below.
Type of firmware
* Engine - Main
* Engine - Music
• System
• Copier Application
• Netfile Application
Printer Application
Scanner Application
Fax Application
* NIB
Scanner IPU
Operation Panel
Fax FCU
Language (16
languages)
* The firmware with an asterisk mark is used in both the printer (G060) version and
CF (G060+G570) version. Other firmware is unique for the CF version. (For
example, if you insert the IC card containing controller firmware for the printer
version, "Download Error SC999" is displayed.
Refer to "5.4.3 Firmware Upgrade" for the procedure.
5.7.2 ERROR RECOVERY
If an error occurs during the firmware update, "NG!" or "ERR" is displayed. In this
case, turn the main switch off and retry the firmware update after reinserting the IC
card using the procedure described in section 5.6.3.
G570
Function
Printer engine control
Line position adjustment
3 different firmware (system,
Copier and Netfile
applications) are combined.
Feature application
Network Interface
Scanner control
Panel control
Fax control
Language firmware
Two languages can be
selected from 16 languages.
5-86
Location of
Message displayed
firmware
BCU Flash ROM Engine (1)
BCU Flash ROM Music (1)
DIMM 1 Onboard Sys (1)
DIMM 2 Onboard Printer (1)
DIMM 2 Onboard Scn (1)
DIMM 2 Opt DIMM Fax (1)
Controller Flash Network Support (1)
ROM
IPU Flash ROM Scanner IPU (1)
Operation Panel Ope Panel. XX (1)
FCU Jupi FCU (XXX)-1 (1)
Operation Panel Download Language
SM