Gestetner G060 Service Manual page 941

Tech Service Bulletin No. G060/G570 – 017
Page 3 of 5
COUNTING METHODS: METER CHARGE MODE ON / METER CHARGE MODE OFF
The total counter of the G060 printer has two different modes of operation
1. Meter Charge Mode Enabled [ON] => set to ON if the customer is charged based on page or
development count
2. Meter Charge Mode Disabled [OFF] => keep this setting if the customer is not charged by page count
Meter Charge Mode ON: Must be ON when the customer is charged by cost per page or cost per
development. Counts pages or developments based on what is output from the machine.
Sample
Print Job
Printer
1. Press the Menu button on the Control Panel
2. Counter is displayed
3. Press the Enter Key (#)
4. Select Show Counter or press the down arrow to select Print Counter
5. Press the Enter Key (#) to display or print the counters
NOTE: To Access this counter, only use the Show Counter or Print Counter option, which appears in the
user menu when Meter charge mode is set to ON.
K CMYK K
Pages
Developments
Menu
K CMYK
Counter "clicks"
Black Color
3 2
5 6
Enter
Down
Continued...