Gestetner G060 Service Manual page 270

PAPER FEED
6.6.2 DRIVE – TRAYS 1 AND 2
[D]
[G]
[D]
The paper feed motor [A] drives the pick-up and feed mechanisms in both tray 1 [B]
and 2 [C] using clutches and complex trains of gears (the locations of the gear
trains are indicated by dotted lines in the above diagram).
When the paper tray is inside the machine, the pick-up roller [D] is always in
contact with the top sheet of the paper stack. When the paper feed clutch [E] turns
on, the pick-up, feed [F], and separation [G] rollers start rotating to feed the paper.
The paper feed clutch stays on until shortly after the registration sensor activates.
G060
[B]
[F]
[G]
6-40
[E]
[A]
[E]
[C]
[F]
G060D105.WMF
SM