Gestetner G060 Service Manual page 1059

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSC38S
LANIER – 2138CMF
RICOH – AP3800CMF
SAVIN – SLP38CS
SUBJECT: XENON LAMP
GENERAL:
The density of the coating applied to the Xenon lamp electrodes has been increased to further improve
the efficiency of lamp warm-up. The following part update is being issued for all G570 Parts Catalogs.
Please update your parts catalog with the following information.
OLD PART NO. NEW PART NO.
G5702725
UNITS AFFECTED:
The serial number cut-in information was not available at the time of this publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Copyright  2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
G060/G570 – 045
B1161800 Xenon Lamp – MM8
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
11/05/2003
REFERENCE
QTY INT PAGE ITEM
1 1 9
Page 1 of 1
8