Gestetner G060 Service Manual page 588

COPY SP MODE
5
(Class 1, 2, and 3)
997 2 Pattern
3 Single Color
4 Color Mode
5 Resolution
6 By-pass Paper size
7 Print
[Memory Clear 2]
998
1 ENG Setting
2 ENG Counter
G570
Mode No.
#
Function / [ Setting ]
Selects a test pattern.
[ 0 to 23 / 0 / 1/step ]
0: None
1: 1-dot sub-scan line
2: 2-dot sub-scan line
3: 1-dot main-scan line
4: 2-dot main-scan line
5: 1-dot grid pattern (fine)
6: 2-dot grid pattern (fine)
7. 1-dot grid pattern (rough)
8. 2-dot grid pattern (rough)
9. 1-dot slant grid pattern
10. 2-dot slant grid pattern
11. 1-dot pattern
12. 2-dot pattern
13. 4-dot pattern
14. 1-dot trimming pattern
15. 2-dot trimming pattern
16. Cross stitch: sub-scan
17. Cross stitch: main-scan
18. Belt pattern
19. Belt pattern (vertical)
20. Checkered Flag
21. Grey scale (vertical)
22. Grey scale (Horizontal)
23. Solid
Selects the color for making a test pattern.
[0 to 6 / 6 / 1/step] Alphanumeric
0: Red
2: Blue
4: Magenta
6: Black
Selects the color mode for making a test print.
[0 or 1 / 0 / 1/step] Alphanumeric
0: Full Color
Selects the resolution for making a test print.
[0 to 2 / 1 / 1/step] Alphanumeric
0: 600x600
2: 1200x1200
Selects the paper size for making a test pattern
from the by-pass table.
[0 to 3 / 0 / 1/step ] Alphanumeric
0: A4 LEF
2: A3
Prints the test pattern with the settings specified
with SP5-997-001 to 006.
NOTE: When exiting the SP mode, the test print
mode is automatically canceled.
Clears the engine settings except for counters.
Clears all counters.
5-50
1: Green
3: Yellow
5: Cyan
1: Single Color
1: 1200x600
1: LT LEF
3: DLT
SM