Gestetner G060 Service Manual page 319

2.3.4 FEED TO TWO-TRAY FINISHER
With Optional One-Tray Paper Feed Unit
The paper is fed out to the finisher from the upper exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] has been activated, the machine
waits until the trailing edge has passed junction mylar 1 [D]. Then, the paper is
switched back and junction mylar 1 directs the paper out to the finisher.
With Optional LCT or Two-Tray Paper Feed Unit
The paper is fed out to the finisher from the lower exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] has been activated, the machine
waits until the trailing edge has passed junction mylar 2 [D], but before it passes
junction mylar 3 [E]. Then, the paper is switched back and junction mylar 2 directs
the paper out to the finisher.
SM
[B]
[A]
[D]
G571D107.WMF
[B]
[A]
[D]
G571D109.WMF
7-11
DUPLEX INVERTER UNIT
[C]
G571D108.WMF
[E]
[C]
G571D110.WMF
G571
[D]
[D]