Gestetner G060 Service Manual page 920

Tech Service Bulletin No. G060 – 013
Page 2 of 2
•
UPDATE 3:
OLD PART NO. NEW PART NO.
G0603692
UNITS AFFECTED:
All G060/G570 Printers manufactured after the Serial Numbers listed below will have the new style Stay
installed during production.
•
UPDATE 4:
OLD PART NO. NEW PART NO.
G0775453
*
DENOTES NEW ITEM NUMBER.
UNITS AFFECTED:
All G060/G570 Printers manufactured after the Serial Numbers listed below will have the new style Harness
– Fusing DC installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Transfer Unit Release Lever Shaft– To provide for smoother
operation of the Transfer Unit Release Lever, the following part has
been changed.
G0603698 Stay
MODEL NAME
Gestetner DSc38
Ricoh AP3800C
Savin SLP38c
Harness – Fusing DC – To make the Fusing DC line Harness more
durable for the assembly process, protective tape has been added to
some areas of the harness.
G0775455 Harness – Fusing DC
MODEL NAME
Gestetner DSc38
Ricoh AP3800C
Savin SLP38c
DESCRIPTION
SERIAL NUMBER
P6010800001
P6010800001
P6010800001
DESCRIPTION
SERIAL NUMBER
P6010800001
P6010800001
P6010800001
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY INT PAGE ITEM
1-1 1 41
REFERENCE
QTY INT PAGE ITEM
1-1 1 67
2
16