Gestetner G060 Service Manual page 935

Rev. 10/2002
4. NIB FIRMWARE MODIFICATION HISTORY
NIB FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
Installed from the first mass production run.
The followings have been corrected:
When the job is canceled, the lpr
!
connection is terminated and a blank space
is displayed in the syslog. Instead of the
blank space, "Lost connection" is displayed.
When 50 or more lpq/lprm commands are
!
sent, the lpd process cannot be completed
properly and the job is not printed out.
If DHCP is ON and TCP/IP is OFF, the
!
current device name (RNPXXXXXX) in
SmartNetMonitor is not displayed.
NIB stops printing if several prints jobs are
!
continuously sent to the NIB via the IPP
port (SmartNetMonitor for Client), and a
print job sent via the standard IPP port may
be canceled.
The followings have been corrected:
Nothing was displayed even though the
!
"prnlog 0" command was done in telnet.
If an undefined remote printer number is
!
input in the Netware configuration page,
communication between the NIB and
Netware Server will be cut off.
No error message is displayed in Netscape
!
Navigator even when an incorrect URL is
input in the address bar.
Up to 32 characters can be input in the
!
NetBEUI configuration screen Comment
box, even though specification is 31
characters maximum.
If Trap is selected for the Access Type in
!
the SNMP Configuration screen during the
snmpd process, communication may be cut
off.
The NIB does not respond to the "lprm –"
!
command (root directory) from a FreeBSD
host computer.
TCP Ports 11021 and 11023 (Design use)
!
have been closed.
There were two error messages displayed
!
when no files were available for download
using FTP. The two messages were
merged to "550: No such file or directory".
Continued On Next Page
SM
FIRMWARE
LEVEL NUMBER
G0605920 J July 2001
G0605920 K July 2001
G0605920 L
G0605920 M
14-9
FIRMWARE HISTORY
SERIAL FIRMWARE
VERSION
1.72.1
1.74
Sept. 1.75.1
2001
January 1.78
2002
G060