Gestetner G060 Service Manual page 1092

Firmware History for G060
DESCRIPTION OF MODIFICATION
Continued From Previous Page
PS status can be displayed in STAT
command using ftpd/ rshd/ telnetd/ lpd.
During a given FTP login session, the NIB
counts up every user command issued as a
new session.
The length of the login user name can be
up to 64 characters when using FTP.
The following have been corrected:
Cannot connect to Novell NDS.
Two or more print queues can be attached
to a single printer object
The controller freezes if it is disconnected
while the data which generates the
Readback command is being printed out
with ftp/rsh.
The controller freezes when it cannot find
the file specified for rcp transmission.
The parameters of sysLocation and
sysContact cannot be set correctly using
the snmp command with telnet.
The Fax Management Tool cannot be used
for a while after any of the NIB setting(s)
are changed.
Change in Specification:
SNMP vulnerability
SNMP security vulnerabilities reported by
CERT on Feb.12, 2002 has been resolved
and tested using the PROTOS c06-snmpv1
test suite.
CERT :http://www.cert.org/advisories/CA-
2002-03.html
PROTOS c06-snmpv1 test suite:
http://www.ee.oulu.fi/research/ouspg/protos/
testing/c06/snmpv1/
TCP ports for disabled services (e.g. FTP)
were open.
An unnecessary TCP port was open.
FIRMWARE SERIAL
LEVEL NUMBER
G0605920 M
January
2002
G0605920 N June
2002
FIRMWARE
CHECK
VERSION
SUM
1.78 AB29
1.81 8FA3
Page 15 of 16