Gestetner G060 Service Manual page 757

Communication Switch 02
No FUNCTION
3
Hang-up decision when a
negative code (RTN or PIN) is
received during G3 immediate
transmission
0: No hang-up, 1: Hang-up
4-7
Not used
Communication Switch 03
No FUNCTION
0 Maximum number of page
to
retransmissions in a G3
7
memory transmission
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
SM
COMMENTS
0: The next page will be sent even if RTN or PIN is
received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or if
ECM is being used.
Do not change the settings.
COMMENTS
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
3-33
BIT SWITCHES
SP No. 1-104-003
SP No. 1-104-004
G307