Gestetner G060 Service Manual page 437

1.5.3 40GB HDD
Accessories Check List
Description
1. 40GB HDD ............................................................................ 1
2. Power Cable ......................................................................... 1
3. Harness................................................................................. 1
4. Screw (M3x6) ........................................................................ 2
5. Key Top (Document Server) ................................................. 1
40 GB HDD Installation
1. Remove the controller board [A]
(2 screws).
2. Mount the 40GB HDD [B] on the
controller (2 connectors, 2
screws).
NOTE: If the CF expander has
already been installed,
remove the IPU board
first, then install the HDD.
3. Reinsert the controller in the
printer using the 2 screws (M3x6)
enclosed in the CF expander,
instead of the original screws.
NOTE: When installing the HDD
and CF expander
simultaneously, be sure to
install both before
performing the next step.
4. Make sure that the power cords are
properly plugged in, then turn on
the main switch. Format the HDD
according to the instructions
displayed on the touch panel. Print
the configuration page and confirm
that the HDD has been properly
installed.
SM
MACHINE INSTALLATION
[B]
1-19
Quantity
[A]
G570I203.WMF
G570I215.WMF
G570