Gestetner G060 Service Manual page 210

PRINTER ENGINE SERVICE MODE
7
(Class 1, 2, and 3)
803 Displays the number of revolutions of motors or clutches for each current maintenance
unit.
[ 0 to 9999999 / 0 / 1 revolution/step ]
When a unit is replaced, the machine automatically detects that the new unit is installed.
Then, the current PM counter value is automatically moved to the PM Counter - Previous
(SP7-906-10 to 20) and is reset to "0". The total number of revolutions made with the last
unit replaced can be checked with SP7-906-10 to 20.
17 R:PCU [K]
18 R:PCU [Y]
19 R:PCU [M]
20 R:PCU [C]
21 R:Dev. [K]
22 R:Dev. [Y]
23 R:Dev. [M]
24 R:Dev. [C]
25 R:Oil Supply
26 R:Fusing
27 R:Transfer
28 S:Waste Toner
29 S:Toner [K]
30 S:Toner [Y]
31 S:Toner [M]
32 S:Toner [C]
33 TonerSupply[K]
34 TonerSupply[Y]
35 TonerSupply[M]
36 TonerSupply[C]
[PM Clear] PM Counter Clear
804
(Unit, [Color])
Dev.: Development Unit, PF: Paper Feed Rollers, Transfer: Transfer Unit
1 PCU [K]
2 PCU [Y]
3 PCU [M]
4 PCU [C]
5 Dev. [K]
6 Dev. [Y]
7 Dev. [M]
8 Dev. [C]
9 Oil Supply
10 PF By-pass
11 PF Tray 1
12 PF Tray 2
13 PF Tray 3/LCT
14 PF Tray 4
15 Fusing
16 Transfer
50 All
807 [SC/Jam Clear] SC/Jam Counter Clear
1 SC/Jam Clear
[Counter Clear]
808
1 Counter Clear
G060
Mode No.
P
P
Function / [ Setting ]
* Target Revolution: 275338
Target Revolution: 295907
Target Revolution: 295907
Target Revolution: 295907
Target Revolution: 1076103
Target Revolution: 1173387
Target Revolution: 1173387
Target Revolution: 1173387
Target Revolution: 1861000
Target Revolution: 9303000
Target Revolution: 5163000
Displays the number of sheets printed until the
waste toner bottle becomes full or toner runs out.
[ 0 to 9999999 / - / 1 sheet/step ]
Displays the total operating time for the toner
attraction pump.
[ 0 to 9999999 / - / 1 s/step ]
* Clears the PM counter.
Press the Enter key after the machine asks
"Execute?".
When a unit is replaced, the machine
automatically detects that the new unit is installed.
Then, the current PM counter value is
automatically moved to the b PM Counter -
Previous (SP7-906-1 to 25) and is reset to "0".
NOTE: The LCT is counted as the 3rd feed
station.
* Clears the counters related to SC codes and
paper jams.
* Clears all counters.
See NOTE 1 after the SP table for a list of
settings cleared.
5-42 SM