6. Install the front [A] and rear [B] tray
holders on the top cover ( x 2 for
each).
7. Install the upper [C] and lower [D]
trays.
8. Turn the main switch on; select the SP
mode menu, SP6–901–1; and change
the multi-bin output tray setting.
NOTE: The multi-bin output tray is not
automatically recognized by the
printer mainframe. The multi-bin
output tray cannot be used until
you have changed this SP mode setting.
SM
MACHINE INSTALLATION
[B]
1-25
[A]
[C]
G306I103.WMF
[D]
G570