Gestetner G060 Service Manual page 602

COPY SP MODE
NOTE 1: Memory Clear (SP5-801 & 7-808)
The following tables list the items that are cleared. The serial number information,
meter charge setting (SP5-930), and meter charge counters (SP7-003) are not
cleared.
5
(Class 1, 2, and 3)
[Memory Clear]
801
1 All module
2 ENG All
3 SCS / SRM
5 MCS
6 Copy Memory Clr?
7 Fax
8 Printer aplication
9 Scanner aplication
10 Network aplication
11 NCS
12 IPU
13 R-Fax
998 1 ENG Setting
2 ENG Counter
7
(Class 1, 2, and 3)
808 [Counter Clear]
1 Counter Clear
G570
Mode No.
#
#
Mode No.
SP Modes or User Setting to be cleared
DFU
DFU
SP5-009, 101, 104, 305, 812, 833, 961, and 970
SP7-101, 204, 209, 401, 502, 504, 506, and 507
Not used.
Initializes the copy application settings.
Initializes the fax application settings.
The following service settings:
• Bit switches
• Gamma settings (User & Service)
• Toner Limit
The following user settings:
• Tray Priority
• Menu Protect
• System Setting except for setting of Energy
Saver
• I/F Setup (I/O Buffer and I/O Timeout)
• PCL Menu
Initializes the scanner application settings.
Deletes the network file application management
files and thumbnails, and initializes the job login
ID.
Initializes the system defaults and interface
settings (IP addresses also), SmartNetMonitor for
Admin, WebStatusMonitor settings, and the
TELNET settings.
Clears the IPU settings
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
All engine related SP modes except for the
following:
• Serial number information
• SP modes related to meter charge
• Counters and logging data
All counters and logging data related to engine
SP Modes or User Setting to be cleared
SP7-101, 204, 209, 502, 504, 506, and 507
5-64 SM