Gestetner G060 Service Manual page 436

MACHINE INSTALLATION
16. Select the language in the UP mode.
17. Set the date and time.
18. Enter SP Mode.
19. Clear the scanner settings by using SP5-801-9.
20. Clear the network application settings by using SP5-801-10.
21. Clear the IPU settings by using SP5-801-12.
22. Exit SP mode and turn the main power off/on.
23. Perform Auto Color Calibration (ACC).
24. Make some test copies in the following modes using a C4 Test Chart.
• Full color in Text Mode
• B&W in Text Mode
25. Check the test copies to make sure each of the following is within standard
values, making any necessary adjustments. ( 3.3 Image Adjustment)
• Leading edge registration
• Side-to-side registration
• Scanner sub-scan magnification
• Scanner leading edge registration
• Scanner side-to-side registration
• ARDF side-to-side registration
• ARDF sheet through registration
26. If necessary, perform the touch panel position adjustment. ( 3.6 Others )
27. If the customer has a service contract, change the meter charge SP mode
settings accordingly.
G570 1-18 SM