Gestetner G060 Service Manual page 981

Tech Service Bulletin No. G060/G570 – 032
•
UPDATE 3:
DELETED PART NUMBER
AA066344
AA066345
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Torsion Springs– Please delete the Rear and Front Torsion Springs
(Item #23 & 24) from the parts catalog descriptions page. These
springs are included with Item #3; Release Shaft P/N G0603694).
Rear Torsion Spring
Front Torsion Spring
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY PAGE ITEM
1 – 0 41 23
1 – 0 41 24
Page 3 of 3