Gestetner G060 Service Manual page 747

Scanner Switch 05
No FUNCTION
0-7
Binary picture processing:
Threshold for colored
background special original 2
mode - Normal setting (center
position)
Scanner Switch 06
No FUNCTION
0
MTF filter level (Text mode)
to The value can be between 0(Off) and F. For a weaker threshold, input a lower value.
3
Default setting: 2
This setting is independent from the threshold specified by the copier SP modes.
4
MTF filter level (Text/Photo mode)
to
The value can be between 0(Off) and F. For a weaker threshold, input a lower value.
7 Default setting: 2
This setting is independent from the threshold specified by the copier SP modes.
Scanner Switch 07
No FUNCTION
0
Smoothing filter level (Photo
to
mode)
2
3-7 Not used
Scanner Switch 08 - Not used (do not change the settings)
Scanner Switch 09 - Not used (do not change the settings)
Scanner Switch 0A
No FUNCTION
0-3
Not used
4-7
MTF filter level (Color mode)
The value can be between 0(Off) and F. For a weaker threshold, input a lower value.
Default setting: 5
This setting is independent from the threshold specified by the copier SP modes.
SM
COMMENTS
This setting determines the threshold value for
binary picture processing in colored background
special original 2 mode (when the scan density
setting is at the center).
The value can be between 01 and FF. For a darker
threshold, input a lower value.
Default setting: 3E (H) = 62(D)
COMMENTS
COMMENTS
The value can be between 0(Off) and 7. For a
weaker threshold, input a lower value.
Default setting: 2
This setting is independent from the threshold
setting specified by the copier SP modes.
Do not change the settings.
COMMENTS
Do not change the settings
3-23
BIT SWITCHES
SP No. 1-102-006
SP No. 1-102-007
SP No. 1-102-008
SP No. 1-102-011
G307