Gestetner G060 Service Manual page 457

<Standard Copy Quality in B/W Text/Photo Mode>
Standard Copy Quality in B/W Text/Photo Mode
Step Item to Adjust
ID max:
1 (K)
Middle (Middle ID)
2 (K)
Shadow (High ID)
3 (K)
Highlight (Low ID)
(K)
4
NOTE: After adjusting 'shadow' as explained above, text parts of the test pattern
may not be printed clearly. If this happens, check whether the 5 line/mm
pattern at each corner is printed clearly. If it is not, adjust the offset value of
'shadow' again until it is.
SM
Level on the C-4 chart (K)
3-9
IMAGE ADJUSTMENT
Adjustment Standard
Adjust the offset value so that
the density of level 10 matches
that of level 10 on the C-4 chart.
Adjust the offset value so that
the density of level 6 matches
that of level 6 on the C-4 chart.
Adjust the offset value so that
the density of level 8 matches
that of level 8 on the C-4 chart.
Adjust the offset value so that
dirty background is not visible on
the copy and the density of level
3 is slightly lighter that of level 3
on the C-4 chart.
G570