Gestetner G060 Service Manual page 598

COPY SP MODE
7
(Class 1, 2, and 3)
804 [PM Counter Clear]
(Unit, [Color])
Dev.: Development Unit, PF: Paper Feed Rollers, Transfer: Transfer Unit
1 PCU [K]
2 PCU [Y]
3 PCU [M]
4 PCU [C]
5 Dev. [K]
6 Dev. [Y]
7 Dev. [M]
8 Dev. [C]
9 Oil Supply
10 PF By-pass
11 PF Tray 1
12 PF Tray 2
13 PF Tray 3/LCT
14 PF Tray 4
15 Fusing
16 Transfer
50 All
808 [Counter Clear]
1 Counter Clear
810 [Access Code Clear]
1 Access Code Clear
816 [Tray Counter Clear]
1 Tray 1
2 Tray 2
3 Tray 3/LCT
4 Tray 4
6 Duplex
[Co. Clear: Mag.] Counter Clear :Magnification
822
1 Co. Clear: Mag.
825 [Counter Reset]
1 Counter Reset
[Diag. Result] Diagnostic Result
832
1 Diag. Result
833 [Coverage] Image Coverage Ratio & No. of Toner Cartridges
1 Last [K]
2 Last [C]
3 Last [M]
4 Last [Y]
5 Average [K]
6 Average [C]
7 Average [M]
8 Average [Y]
G570
Mode No.
*
BCU
*
BCU
Function / [ Setting ]
Clears the PM counter.
Press the Enter key after the machine asks
"Execute?".
When a unit is replaced, the machine
automatically detects that the new unit is installed.
Then, the current PM counter value is
automatically moved to the b PM Counter -
Previous (SP7-906-1 to 25) and is reset to "0".
NOTE: The LCT is counted as the 3rd feed
station.
Clears all counters.
NOTE 1 after the SP table for a list of
settings cleared.
Use to clear the access code if the customer
forgets the code (password).
Clears the counters (SP7-204) for the number of
sheets fed from the paper feed stations.
NOTE: The LCT is counted as the 3rd feed
station.
Clear the copy counters classed by magnification
mode (SP7-301).
Rests the total counter values to "0".
NOTE: This SP mode can be done only once,
while the counter values are less than 0.
Displays the result of the diagnostics.
Displays the image coverage ratio for each color
of the last output.
[ 0 to 100.00 / - / 0.01 %/step ]
Displays accumulated average value of image
coverage ratio for each color.
[ 0 to 100.00 / - / 0.01 %/step ]
5-60 SM