Gestetner G060 Service Manual page 629

USER PROGRAM MODE
5.9 USER PROGRAM MODE
The user program (UP) mode is accessed by users and operators, and by sales
and service staff. UP mode is used to input the copier's default settings. The
system/copier settings can be reset at any time by the user. ( 5.6)
5.9.1 HOW TO USE UP MODE
UP Mode Initial Screen: User Tools/Counter Display
To enter the UP mode, press User Tools/Counter .
G570S903.WMF
System Settings
In the User Tools/Counter display, press System Settings.
Press a tab to display the settings. If the Next button is lit in the lower right corner,
press to display more options. Perform the settings, press Exit to return to the User
Tools/Counter display, and then press exit to return to the copy window.
G570S904.WMF
SM 5-91 G570