Gestetner G060 Service Manual page 479

OTHERS
Rev. 07/2003
⇒
3.6.2 G367 TO G570 MODIFICATION
Background
Use the following procedure when attaching a G367 Copy Feature Expander
(G080) to a G060 printer.
Preparation
Items needed for conversion.
DIMM #1 for G570 Copy Feature P/N: G5706691 (See TSB G060/G570 – 036)
Flashcards loaded with the following G570 Copy Feature Expander firmware:
CF NIB, Scanner Application, Fax Application and Operation Panel (LCDC)
Procedure
Turn the main power switch OFF.
1. Remove the controller (2 screws) [A].
[A]
2. Remove the printer DIMM (Slot 1) [B]
3. Insert DIMM #1 for the G570 into the upper slot [C].
4. Insert DIMM #2 for the G570 (included) into the center slot [D].
5. Turn controller board DIP SW1 ON.
[B]
[C]
[D]
SM 3-31 G570