Gestetner G060 Service Manual page 547

5.4 COPY SP MODE
5.4.1 SP MODES
SP1-XXX (Feed)
Mode No.
1
(Class 1, 2, and 3)
[Lead Edge Reg.] Leading Edge Registration
001
(Paper Type, [Color ], Process Speed)
1 Normal [K] 62.5
2 Normal [K] 125
3 Normal [K] 185
4 Normal [FC] 62.5
5 Normal [FC] 125
6 Thick [K]
7 Thick [FC]
8 OHP [K]
9 OHP [FC]
[Side to Side Reg.] Side-to-Side Registration
002
1 By-pass Table
2 Paper Tray 1
3 Paper Tray 2
4 Paper Tray 3
5 Paper Tray 4
6 Duplex
[Paper Buckle] Paper Buckle
003
( P aper Tray or B y-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH: Thick
1 Paper Tray 62.5
2 Paper Tray 125
3 Paper Tray 185
4 By-pass N 62.5
5 By-pass N 125
6 By-pass N 185
7 By-pass TH
8 By-pass OHP
[Dev. Motor Speed] Development Drive Motor Speed 1
004
([Color], Process Speed, Paper Type)
1 [K] 62.5 Normal
2 [K] 125
3 [K] 185
4 [YMC] 62.5
5 [YMC] 125
6 [YMC] 185
7 [K] 62.5 Thick
SM
Function / [ Setting ]
* Adjusts the leading edge registration by changing
BCU
the registration clutch operation timing for each
mode.
[ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
* Adjusts the side-to-side registration by changing
BCU the laser main scan start position for each mode.
[ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
[ -10.0 to 10.0 / 0.0 / 0.1 mm/step ]
* Adjusts the amount of paper buckle at the
BCU registration roller by changing the paper feed
timing.
[ -10 to 10 / 0.0 / 1 mm/step ]
* Adjusts the development drive motor speed for
BCU correcting color shifts at the leading edge or
trailing edge area.
Black Motor [K]:
Adjusts fusing roller speed for the trailing edge
area.
Color Motor [YMC]:
Adjusts registration roller speed for the leading
edge area.
[ 96.0 to 104.0 / 100.0 / 0.1 %/step ]
NOTE:
•
SP1-004-002 and 005 is for color mode. Fine
adjustment for B&W mode can be done with
SP1-005-001 and 002.
•
SP1-004-004 is for normal paper. Fine
adjustment for thick paper can be done with
SP1-005-003.
5-9
COPY SP MODE
G570