Oil Supply And Cleaning - Gestetner G060 Service Manual

6.8.4 OIL SUPPLY AND CLEANING

• The oil supply mechanism makes it easier for paper to separate from the fusing
belt and roller after fusing.
• The oil [A] from the oil supply pad [B] is supplied to the oil supply roller [C]. The
oil supply roller rotates and supplies a bit of oil to the fusing belt.
• The oil supply solenoid [A] moves the oil supply unit up and down. When a print
job starts, the solenoid repeatedly turns on and off for the first few pages to apply
the correct amount of oil to the oil supply roller. Then, for the remaining pages of
the job, it stays in contact with the roller.
At other times, the unit stays away to reduce oil consumption.
SM
[B]
[C]
[A]
6-57
FUSING
[A]
G060D505.WMF
G060D508.WMF
G060