Printer Engine Service Mode; Service Mode Table ("2. Engine"); Sp1-Xxx (Feed) - Gestetner G060 Service Manual

5.3 PRINTER ENGINE SERVICE MODE

5.3.1 SERVICE MODE TABLE ("2. ENGINE")

SP1-XXX (Feed)

Mode No.
1
(Class 1, 2, and 3)
001 [Lead Edge Reg.] Leading Edge Registration
(Paper Type, [Color ], Process Speed), Paper Type -> N: Normal, OHP, TH: Thick
1 N [K] 62.5
2 N [K] 125
3 N [K] 185
4 N [FC] 62.5
5 N [FC] 125
6 TH [K]
7 TH [FC]
8 OHP [K]
9 OHP [FC]
002 [S-to-S Reg.] Side-to-Side Registration
1 By-pass Table
2 Paper Tray 1
3 Paper Tray 2
4 Paper Tray 3
5 Paper Tray 4
6 Duplex
[Paper Buckle] Paper Buckle
003
(Paper Tray or By-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH: Thick
1 P 62.5
2 P 125
3 P 185
4 B N 62.5
5 B N 125
6 B N 185
7 B TH
8 B OHP
004 [Dev. Mt Speed1] Development Drive Motor Speed 1
([Color], Process Speed, Paper Type), Paper Type -> N: Normal, TH: Thick
1 [K] 62.5 N
2 [K] 125
3 [K] 185
4 [YMC] 62.5
5 [YMC] 125
6 [YMC] 185
7 [K] 62.5 TH
SM
PRINTER ENGINE SERVICE MODE
Function / [ Setting ]
* Adjusts the leading edge registration by changing
the registration clutch operation timing for each
*
mode.
*
[ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
*
*
*
*
*
*
* Adjusts the side-to-side registration by changing
the laser main scan start position for each mode.
*
[ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
*
* [ -10.0 to 10.0 / 0.0 / 0.1 mm/step ]
*
*
* Adjusts the amount of paper buckle at the
registration roller by changing the paper feed
*
timing.
*
[ -10 to 10 / 0.0 / 1 mm/step ]
*
*
*
*
*
* Adjusts the development drive motor speed for
correcting color shifts at the leading edge or
*
trailing edge area.
*
Black Motor [K]:
*
Adjusts fusing roller speed for the trailing edge
*
area.
*
Color Motor [YMC]:
*
Adjusts registration roller speed for the leading
edge area.
[ 96.0 to 104.0 / 100.0 / 0.1 %/step ]
NOTE:
•
SP1-004-002 and 005 is for color mode. Fine
adjustment for B&W mode can be done with
SP1-005-001 and 002.
•
SP1-004-004 is for normal paper. Fine
adjustment for thick paper can be done with
SP1-005-003.
5-7 G060