Service Program Mode; Enabling And Disabling Service Program Mode; Entering The Service Mode - Gestetner G060 Service Manual

5. SERVICE TABLES

5.1 SERVICE PROGRAM MODE


CAUTION
Before accessing the service menu, do the following:
Confirm that there is no print data in the printer buffer (the Data In LED
must not be lit or blinking).
If there is some data in the buffer, wait until all data has been printed.

5.1.1 ENABLING AND DISABLING SERVICE PROGRAM MODE

/NLINE
*ON 2ESET

Entering the Service Mode

There are two ways to enter the service mode.
Method 1: Turn the machine on while pressing the "On Line" key and "Escape" key
together until the above message in the illustration appears on the display.
NOTE: If you switch the machine off, any jobs stored on the hard disk using the
sample print and locked print features will be deleted.
Check first with the user tools to see if there are any jobs stored with these
features
(Menu key - Sample Print, or Protected Print).
Method 2: Press the "Up/Down arrow" keys together for about 5 seconds, then
press the "Enter" key.
The above message shown in the illustration appears on the display.
NOTE: The machine automatically goes off line when you enter the service mode.
SM
-ENU
3934%- 6ER 6ER 3934%- 6ER 6ER
 ^ 1 S
3ERVICE 3ERVICE
&ORM &EED
0OWER %RROR
5-1
SERVICE PROGRAM MODE
%SCAPE
K B C
%NTER 
$ATA )N
G058D520.WMF
G060