Gestetner G060 Service Manual page 1093

Firmware History for G060
DESCRIPTION OF MODIFICATION
The following have been corrected:
HTTP and telnet protocols can be
opened/closed using telnet.
NOTE: After making the setting to disable
HTTP, you cannot access the target
device through a web browser. If
your want to change this settings,
please use telnet to open HTTP.
When telnet port is disabled, you
have to do clear the network settings
(SP5-801-11) to open the telnet
protocol.
Changed the default setting of DHCP to
ON.
NOTE: There is no change when updating
the firmware. This feature is for the
factory default.
It does not work in a UNIX environment
even if the install Script in the controller is
downloaded.
⇒
The following have been corrected:
- Access Mask does not work.
FIRMWARE SERIAL
LEVEL NUMBER
G0605920 P October
2002
G0605920 Q July
2003
FIRMWARE CHECK
VERSION SUM
1.82 384B
1.83 E5D7
Page 16 of 16