Gestetner G060 Service Manual page 936

FIRMWARE HISTORY
DESCRIPTION OF MODIFICATION
Continued From Previous Page
PS status can be displayed in STAT
!
command using ftpd/ rshd/ telnetd/ lpd.
During a given FTP login session, the NIB
!
counts up every user command issued as a
new session.
The length of the login user name can be
!
up to 64 characters when using FTP.
The following have been fixed:
Cannot connect to Novell NDS (GFPR#
!
RC02010007).
Two or more print queues can be attached
!
to a single printer object
The controller freezes if it is disconnected
!
while the data which generates the
Readback command is being printed out
with ftp/rsh.
The controller freezes when it cannot find
!
the file specified for rcp transmission.
The parameters of sysLocation and
!
sysContact cannot be set correctly using
the snmp command with telnet.
The Fax Management Tool cannot be used
!
for a while after any of the NIB setting(s)
are changed.
Change in Specification:
SNMP vulnerability
!
SNMP security vulnerabilities reported by
CERT on Feb.12, 2002 has been resolved
and tested using the PROTOS c06-snmpv1
test suite.
CERT :http://www.cert.org/advisories/CA-
2002-03.html
PROTOS c06-snmpv1 test suite
:http://www.ee.oulu.fi/research/ouspg/proto
s/testing/c06/snmpv1/
TCP ports for disabled services (e.g. FTP)
!
were open.
An unnecessary TCP port was open.
!
G060
FIRMWARE
LEVEL
G0605920 M
G0605920 N
14-10
Rev. 10/2002
SERIAL FIRMWARE
NUMBER VERSION
January 1.78
2002
June 2002 1.81
SM